Master the 70-341 Core Solutions of Microsoft Exchange Server 2013 content and be ready for exam day success quickly with this Examcollection 70-341 dumps. We guarantee it!We make it a reality and give you real 70-341 questions in our Microsoft 70-341 braindumps.Latest 100% VALID Microsoft 70-341 Exam Questions Dumps at below page. You can use our Microsoft 70-341 braindumps and pass your exam.

Q101. HOTSPOT

Your network contains an Active Directory forest named contoso.com. The forest contains one domain and two sites named Site1 and Site2. Site1 connects directly to the Internet. 

You have an Exchange Server 2010 organization. 

Users access their email remotely by using Outlook Web App and Outlook Anywhere by connecting to the name mail.contoso.com. 

You plan to migrate to Exchange Server 2013. 

Exchange Server 2010 and Exchange Server 2013 will co-exist for several months during the migration. During the co-existence phase, the organization will contain seven servers. The servers will be configured as shown in the following table. 

You need to identify which host names must be associated to which servers. The solution must ensure that the users can access mailboxes on EX2, EX4, EX6, and EX7. 

What should you do? (To answer, select the appropriate target for each host name in the dialog box in the answer area.) 

Answer: 


Q102. DRAG DROP 

You are evaluating the implementation of the address rewrite feature in the Fabrikam forest. 

You need to recommend a solution for the Trey Research forest and the Fabrikam forest to share the SMTP domain name of treyresearch.com. 

Which actions should you recommend performing in each forest? (To answer, drag the appropriate actions to the correct forests. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content) 

Answer: 


Q103. You need to recommend which tasks must be performed to deliver email messages to the Internet if CH-EX2 and CH-EX3 fail to connect to the Internet. The solution must ensure that all queued email is sent. 

Which two tasks should you recommend? (Each correct answer presents part of the solution. Choose two.) 

A. Run the retry-queue ch-to-internet command. 

B. Create a new Send connector on a server in the Baltimore office. 

C. Modify the cost of the CH-to-Internet Send connector. 

D. Run the set-sendconnector -identity ch-to-internet -frontendproxyenabled Strue command. 

E. Disable the CH-to-Internet Send connector. 

Answer: B,E 


Q104. You have an Exchange Server 2013 organization that contains five servers. 

All users connect to their mailbox by using a mobile device. 

All of the users in the finance department are in an organizational unit (OU) named OU1. 

You need to prevent the finance users from accessing the extended storage on their mobile 

device. 

What should you do? 

A. Create a new mobile device mailbox policy, and then run the Set-CasMailboxcmdlet. 

B. Create a new device access rule, and then run the Set-Mailbox cmdlet. 

C. Create a new mobile device mailbox policy, and then run the Set-Mailboxcmdlet. 

D. Create a new device access rule, and then run the Set-CasMailboxcmdlet. 

Answer:


Q105. You have an Exchange Server 2013 organization named fabrikam.com. 

You have a distribution group named DL1 and a user named User1. The managedBy attribute of DL1 is fabrikam.com\\users\\User1. 

User1 attempts to add a user named User2 to DL1 and receives the following error message: "Changes to the public group membership cannot be saved. You do not have sufficient permissions to perform this operation on this object." 

You need to ensure that User1 can add User2 to DLL 

What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.) 

A. From Exchange Management Shell, run New-ManagementRoleAssignment -Name "Default Role Assignment Policy- MyDistributionGroupMembership" -Policy "Default Role Assignment Policy" -Role "MyDistributionGroupMembership 

B. From Exchange Admin Center, edit the Default Role Assignment Policy and select MyDistributionGroups 

C. From Exchange Management Shell, run New-ManagementRoleAssignment -Name "Default Role Assignment Policy-MyDistributionGroups" -Policy "Default Role Assignment Policy" -Role "MyDistributionGroups". 

D. From Exchange Admin Center, edit the Default Role Assignment Policy and select MyDistributionGroupMembership. 

Answer: A,C 


Q106. A user fails to connect to his mailbox by using Outlook Anywhere. The user successfully connects to the mailbox by using an Exchange ActiveSync-enabled mobile device and Outlook Web App. 

You need to identify what prevents the users from connecting to the mailbox by using Outlook Anywhere. 

Which tool should you use? 

A. Microsoft Outlook Connectivity Test 

B. Microsoft Exchange RPC Extractor 

C. Microsoft Exchange Server Profile Analyzer 

D. Exchange Server MAPI Editor 

Answer:


Q107. Your network contains an Active Directory forest named contoso.com. The forest contains an enterprise root certification authority (CA) named CA1. The network contains a server named EX1 that has Exchange Server 2013 installed. 

A partner company named A. Datum Corporation has an Active Directory domain named adatum.com. The domain contains a server named EX5 that has Exchange Server 2010 Service Pack 2 (SP2) installed. EX5 has a Receive connector that is configured for mutual TLS. 

Users in contoso.com plan to send email messages that contain sensitive data to users in adatum.com. 

You need to ensure that all of the email messages sent from contoso.com to adatum.com are encrypted by using TLS. The solution must ensure that EX1 and EX5 validate server certificates. 

Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.) 

A. Run the set-transportconfig -tlssenddomainsecurelist contoso.com command. 

B. Install a certificate, and then assign the certificate to the IIS service. Send the root certificate for contoso.com to the administrators in adatum.com. 

C. Run the New-SendConnector cmdlet and specify the domainsecureenabled parameter. 

D. Run the New-SendConnector cmdlet and specify the tlsdomainparameter. 

E. Run the set-transportconfig -tlssenddomainsecurelist adatum.com command. 

F. Install a certificate, and then assign the certificate to the SMTP service. Send the root certificate for contoso.com to the administrators in adatum.com. 

Answer: A,D,F 


Q108. DRAG DROP 

You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table. 

You need to create a new database availability group (DAG) that contains EX1 and EX2. 

Which three actions should you perform? 

To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. 

Answer: 


Q109. HOTSPOT 

You need to ensure that the help desk application can use EX4 as an SMTP relay to send email messages. The solution must ensure that the sender of the email messages is displayed as Help Desk. 

What authentication and permission group should you configure for the Receive Connector? (To answer, configure the appropriate options in the answer area.) 

Answer: 

Topic 7, Mix Questions

56. Your company has a main office and three branch offices. 

You have an Exchange Server 2013 organization. The main office contains five Exchange servers. Each branch office contains two Exchange servers. All of the servers have all of the Exchange server roles installed. Each branch office contains one database availability group (DAG). 

You need to recommend a load balancing solution for the branch offices. The solution must ensure that both servers in each office are the targets of all client connections. 

What are two possible recommendations? Each correct answer presents a complete solution. 

A. DNS round robin 

B. Layer 4 hardware load balancers 

C. CAS arrays 

D. Network Load Balancing (NLB) clusters 

Answer: B,C 


Q110. Your network contains an Active Directory forest named contoso.com. 

The forest contains the domain controllers configured as shown in the following table. 

You plan to deploy an Exchange Server 2013 organization to the forest 

A company policy prevents administrators from logging on to DC2 to perform installations. 

You need to prepare the Active Directory schema for the planned Exchange Server deployment. 

You verify that your user account has all the required permissions to achieve the task. The solution must minimize changes to the Active Directory infrastructure. 

A. Move the schema master role to DC1, and then run Exchange setup. 

B. Deploy a member server to contoso.com, and then move the server to the West site. Run adprep.exe from the member server. 

C. Log on to DC3 and then run Exchange setup. 

D. Log on to any server in the West site, and then run Exchange setup. 

Answer: