Master the 70 410 vce Installing and Configuring Windows Server 2012 content and be ready for exam day success quickly with this Pass4sure 70 410 pdf practice question. We guarantee it!We make it a reality and give you real 70 410 pdf questions in our Microsoft braindumps 70 410 braindumps.Latest 100% VALID Microsoft exam collections 70 410 Exam Questions Dumps at below page. You can use our Microsoft 70 410 vce braindumps and pass your exam.

Q121. HOTSPOT - (Topic 1) 

Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Server1 that runs Windows Server 2012 R2. 

You share several printers on Server1. 

You need to ensure that you can view the printer objects associated to Server1 in Active 

Directory Users and Computers. 

Which option should you select? 

To answer, select the appropriate option in the answer area. 

Answer: 


Q122. - (Topic 1) 

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has three physical network adapters named NIC1, NIC2, and NIC3. 

On Server1, you create a NIC team named Team1 by using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10. 

You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails. 

What should you do? 

A. From Server Manager, change the load balancing mode of Team1. 

B. Run the New-NetLbfoTeam cmdlet. 

C. From Server Manager, add an interface to Team1. 

D. Run the Add-NetLbfoTeamMember cmdlet. 

Answer:


Q123. - (Topic 3) 

You have a file server named Server1 that runs Windows Server 2012 R2. Server1 has following hardware configurations: 

-16GB of RAM 

-A single quad-core CPU 

-Three network teams that have two network adapters each 

You add additional CPUs and RAM to Server 1. 

You repurpose Server1 as a virtualization host. You install the Hyper-V server role on Server1. You need to create four external virtual switches in Hyper-V. Which cmdlet should you run first? 

A. Set-NetAdapter. 

B. Add-Net1.bfoTeamNic 

C. Add-VMNetworkAdapter 

D. Remove-NetLbfoTeam 

Answer:


Q124. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. 

You have a starter Group Policy object (GPO) named GPO1 that contains more than 100 

settings. 

You need to create a new starter GPO based on the settings in GPO1. 

You must achieve this goal by using the minimum amount of administrative effort. 

What should you do? 

A. Run the New-GPStarterGPO cmdlet and the Copy-GPO cmdlet. 

B. Create a new starter GPO and manually configure the policy settings of the starter GPO. 

C. Right-click GPO1, and then click Back Up. Create a new starter GPO. Right-click the new GPO, and then click Restore from Backup. 

D. Right-click GPO1, and then click Copy. Right-click Starter GPOs, and then click Paste. 

Answer:

Explanation: 

Although GPOs and Starter GPOs can both be copied, and a Starter GPO can be used to create a new GPO (as that is their purpose), an existing GPO cannot be copied to a new Starter GPO (unfortunately). 


Q125. DRAG DROP - (Topic 3) 

You plan to deploy a DHCP server that will support four subnets. The subnets will be configured as shown in the following table: 

You need to identify which network ID you should use for each subnet. What should you identify? To answer, drag the appropriate network ID to the each subnet in the answer area. 

Answer: 


Q126. - (Topic 3) 

You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. 

You are running a training exercise for junior administrators. You are currently discussing the new VHD format called VHDX. 

Which of the following is TRUE with regards to VHDX? (Choose all that apply.) 

A. It supports virtual hard disk storage capacity of up to 64 GB. 

B. It supports virtual hard disk storage capacity of up to 64 TB. 

C. It does not provide protection against data corruption during power failures. 

D. It has the ability to store custom metadata about the file that the user might want to record. 

Answer: B,D 

Explanation: 

The main new features of the VHDX format are: Support for virtual hard disk storage capacity of up to 64 TB. Protection against data corruption during power failures by logging updates to the VHDX metadata structures. Improved alignment of the virtual hard disk format to work well on large sector disks. The VHDX format also provides the following features: Larger block sizes for dynamic and differencing disks, which allows these disks to attune to the needs of the workload. A 4-KB logical sector virtual disk that allows for increased performance when used by applications and workloads that are designed for 4-KB sectors. The ability to store custom metadata about the file that the user might want to record, such as operating system version or patches applied. Efficiency in representing data (also known as “trim”), which results in smaller file size and allows the underlying physical storage device to reclaim unused space. (Trim requires physical disks directly attached to a virtual machine or SCSI disks, and trim-compatible hardware). VHDX Format – Features and Benefits VHDX format features provide features at the virtual hard disk as well as virtual hard disk file layers and is optimized to work well with modern storage hardware configurations and capabilities. At the virtual hard disk layer, benefits include the ability to represent a large virtual disk size up to 64 TB, support larger logical sector sizes for a virtual disk up to 4 KB that facilitates the conversion of 4 KB sector physical disks to virtual disks, and support large block sizes for a virtual disk up to 256 MB that enables tuning block size to match the IO patterns of the application or system for optimal performance. At the virtual hard disk file layer, the benefits include the use of a log to ensure resiliency of the VHDX file to corruptions from system power failure events and a mechanism that allows for small pieces of user generated data to be transported along with the VHDX file. On modern storage platforms, the benefits include optimal performance on host disks that have physical sector sizes larger than 512 bytes through improved data alignment and capability to use the information from the UNMAP command, sent by the application or system using the virtual hard disk, to optimize the size of the VHDX file. The format is designed so that additional features could be introduced in the future by Microsoft or extended by other parser implementations. The format provides parsers the ability to detect features in a VHDX file that a parser does not understand. 


Q127. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains three member servers. 

The servers are configured as shown in the following table. 

All client computers run Windows 8. All client computers receive updates from Server2. 

On Server3, you add a shared printer named Printer1. Printer1 uses a Type 4 driver that is not included in the Windows 8 installation media. 

You need to ensure that when users connect to the printer for the first time, the printer driver is installed automatically on their client computer. 

What should you do? 

A. From the Windows Deployment Services console on Server1, add the driver package for Printer1. 

B. From the Update Services console on Server2, import and approve updates. 

C. From Windows PowerShell on Server3, run the Add-PrinterDriver cmdlet. 

D. From the Print Management console on Server3, add additional drivers for Printer1. 

Answer:


Q128. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers. The domain controllers are configured as shown in the following table. 

In the perimeter network, you install a new server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. You need to join Server1 to the contoso.com domain. What should you use? 

A. The New-ADComputer cmdlet 

B. The djoin.exe command 

C. The dsadd.exe command 

D. The Add-Computer cmdlet 

Answer:


Q129. HOTSPOT - (Topic 2) 

Your network contains an Active Directory forest. The forest contains two domains named Domain1 and Domain2. 

Domain1 contains a file server named Server1. Server1 has a shared folder named Share1. 

Domain2 contains 50 users who require access to Share1. 

You need to create groups in each domain to meet the following requirements: 

. In Domain1, create a group named Group1. Group1 must be granted access to Share1. . In Domain2, create a group named Group2. Group2 must contain the user accounts of the 50 users. . Permission to Share1 must only be assigned directly to Group1. 

Which type of groups should you create and which group nesting strategy should you use? 

To answer, select the appropriate configuration in the answer area. 

Answer: 


Q130. - (Topic 2) 

Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table. 

VM3 is used to test applications. 

You need to prevent VM3 from synchronizing its clock to Server1. 

What should you configure? 

A. NUMA topology 

B. Resource control 

C. Resource metering 

D. Virtual Machine Chimney 

E. The VLAN ID 

F. Processor Compatibility 

G. The startup order 

H. Automatic Start Action 

I. Integration Services 

J. Port mirroring 

K. Single-root I/O visualization 

Answer:

Explanation: 

Integration Services settings on virtual machines includes services such as operating system shutdown, time synchronization, data exchange, Heart beat, and Backup (volume snapshot services. Thus you should disable the time synchronization using Integration Services. 

References: http://blogs.technet.com/b/virtualization/archive/2008/08/29/backing-up-hyper-v-virtual-machines.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144