Act now and download your Microsoft 70 410 exam test today! Do not waste time for the worthless Microsoft mcp 70 410 tutorials. Download Replace Microsoft Installing and Configuring Windows Server 2012 exam with real questions and answers and begin to learn Microsoft 70 410 dumps pdf with a classic professional.
Q51. HOTSPOT - (Topic 3)
You have a DNS server named Server1. Server1 runs Windows Server 2012 R2. The network ID is 10.1.1.0/24. An administrator creates several reverse lookup zones. You need to identify which reverse lookup zone is configured correctly. Which zone should you identify? To answer, select the appropriate zone in the answer area.
Q52. - (Topic 2)
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup.
You need to configure a local Group Policy on Server1 that will apply only to non-administrators.
Which tool should you use?
A. Group Policy Object Editor
B. Group Policy Management
C. Group Policy Management Editor
D. Server Manager
Once you create a GPO, you can open it in the Group Policy Management Editor and
configure the GPO’s policies, specifically those settings that target the non-administrators.
In this scenario however, you still need to configure the Group Policy thus you would need
the GPO Editor.
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10:
Implementing Group Policy, Lesson 1: Planning, implementing and managing group policy,
Q53. HOTSPOT - (Topic 1)
Your network contains an Active Directory domain named adatum.com.
You create an account for a temporary employee named User1.
You need to ensure that User1 can log on to the domain only between 08:00 and 18:00
from a client computer named Computer1.
From which tab should you perform the configuration?
To answer, select the appropriate tab in the answer area.
Q54. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2.
On Server1, you create a printer named Printer1. You share Printer1 and publish Printer1 in Active Directory.
You need to provide a group named Group1 with the ability to manage Printer1.
What should you do?
A. From Print Management, configure the Sharing settings of Printer1.
B. From Active Directory Users and Computers, configure the Security settings of Server1-Printer1.
C. From Print Management, configure the Security settings of Printer1.
D. From Print Management, configure the Advanced settings of Printer1.
If you navigate to the Security tab of the Print Server Properties you will find the Permissions that you can set to Allow which will provide Group1 with the ability to manage Printer1.
Set permissions for print servers
Open Print Management.
In the left pane, click Print Servers, right-click the applicable print server and then
On the Security tab, under Group or users names, click a user or group for which
you want to set permissions.
Under Permissions for <user or group name>, select the Allow or Deny check
boxes for the permissions listed as needeD.
To edit Special permissions, click Advanced.
On the Permissions tab, click a user group, and then click Edit.
In the Permission Entry dialog box, select the Allow or Deny check boxes for the
permissions that you want to edit.
Q55. - (Topic 3)
Your network contains two Hyper-V hosts named Host1 and Host2. Host1 contains a virtual machine named VM1. Host2 contains a virtual machine named VM2. VM1 and VM2 run Windows Server 2012 R2.
You install the Network Load Balancing feature on VM1 and VM2.
You need to ensure that the virtual machines are configured to support Network Load Balancing (NLB).
Which virtual machine settings should you configure on VM1 and VM2?
A. DHCP guard
B. MAC address
C. Router guard
D. Port mirroring
When MAC addresses are not assigned to virtual machines, it could cause network problems.
References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V virtualization, Lesson 1: Deploying and configuring Hyper-V hosts, p. 313-319 http://blogs.msdn.com/b/clustering/archive/2010/07/01/10033544.aspx
Q56. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a user account named User1 that resides in an organizational unit (OU) named OU1.
A Group Policy object (GPO) named GPO1 is linked to OU1. GPO1 is used to publish several applications to a user named User1.
In the Users container, you create a new user named User2.
You need to ensure that the same applications are published to User2.
What should you do?
A. Modify the settings in GPO1.
B. Move User2 to OU1
C. Link a WMI filter to GPO1.
D. Modify the security of GPO1.
Moving User2 to OU1 will give him the same access as User1.
The GPO is linked to OU1. By moving User2 to OU1 the GPO will be applied to this user.
Q57. - (Topic 3)
You have a Hyper-V host named server1 that runs windows server 2012 R2.server1 host 50 virtual machines that run windows server 2012 R2
You enable and configure enhanced session mode on Server1.
You need to identify a new functionality available for the virtual machines hosted on server1.
What should you identify?
A. Smart card authentication using virtual machine connections
B. Redirection of RemoteFX USB drivers by using remote desktop connections
C. Redirection of RemoteFX USB drivers using virtual machine connections
D. smart card authentication using the remote desktop client.
Q58. - (Topic 3)
Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.
You need to ensure that you can use Server Manager on DC1 to manage DC2.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Microsoft .NET Framework 4 on DC2.
B. Install Remote Server Administration Tools on DC1.
C. Install Remote Server Administration Tools on DC2.
D. Install Windows Management Framework 3.0 on DC2.
Windows Management Framework 3.0. To use this release of Server Manager to access and manage remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install .NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers. Note: In Windows Server 2012 R2, you can use Server Manager to perform management tasks on remote servers. Remote management is enabled by default on servers that are running Windows Server 2012 R2. To manage a server remotely by using Server Manager, you add the server to the Server Manager server pool. You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems (see above).
Reference: Configure Remote Management in Server Manager.
Q59. - (Topic 3)
Your network contains two subnets. The subnets are configured as shown in the following table.
You have a server named Server2 that runs Windows Server 2012 R2. Server2 is connected to LAN1. You run the route print command as shown in the exhibit.
You need to ensure that Server2 can communicate with the client computers on LAN2.
What should you do?
A. Change the metric of the 10.10.1.0 route.
B. Set the state of the Teredo interface to disable.
C. Set the state of the Microsoft ISATAP Adapter #2 interface to disable.
D. Run route delete 172.23.2.0.
You should delete the route 172.23.2.0 to allow communication between the client computers and Server2. The route is used to identify PIv6 /IPv4 packets that are being sent.
Q60. HOTSPOT - (Topic 1)
Your network contains an Active Directory domain named contoso.com. All domain
controllers run Windows Server 2012 R2.
All servers are configured to enforce AppLocker policies.
You install a server named Server1.
On Server1, you install an application named App1.exe in a folder located on C:\\App1.
You have two domain groups named Group1 and Group2.A user named User1 is a
member of Group1 and Group2.
You create a Group Policy object (GPO) named GPO1. You link GPO1 to contoso.com.
You create the executable rules as shown in the exhibit by using the Create Executable Rules wizard. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.