It is more faster and easier to pass the Microsoft 70 410 questions exam by using Actual Microsoft Installing and Configuring Windows Server 2012 questuins and answers. Immediate access to the Renew 70 410 study guide pdf Exam and find the same core area 70 410 pdf questions with professionally verified answers, then PASS your exam with a high score now.

Q81. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed. 

Contoso.com has a domain controller, named ENSUREPASS-DC01. 

You have been instructed to make sure that the Group Policy Administrative Templates are available centrally. 

Which of the following actions should you take? 

A. You should consider copying the policies folder to the PolicyDefinitions folder in the Contoso.com domain’s SYSVOL folder. 

B. You should consider copying the PolicyDefinitions folder to the policies folder in the Contoso.com domain’s SYSVOL folder. 

C. You should consider copying the PolicyDefinitions folder to the policies folder in the Contoso.com domain’s systemroot folder. 

D. You should consider copying the PolicyDefinitions folder to the policies folder in the Contoso.com domain’s logonserver folder. 

Answer:

Explanation: 

PolicyDefinitions folder within the SYSVOL folder hierarchy. By placing the ADMX files in this directory, they are replicated to every DC in the domain; by extension, the ADMX-aware Group Policy Management Console in Windows Vista, Windows 7, Windows Server 2008 and R2 can check this folder as an additional source of ADMX files, and will report them accordingly when setting your policies. By default, the folder is not created. Whether you are a single DC or several thousand, I would strongly recommend you create a Central Store and start using it for all your ADMX file storage. It really does work well. The Central Store To take advantage of the benefits of .admx files, you must create a Central Store in the SYSVOL folder on a domain controller. The Central Store is a file location that is checked by the Group Policy tools. The Group Policy tools use any .admx files that are in the Central Store. The files that are in the Central Store are later replicated to all domain controllers in the domain. To create a Central Store for .admx and .adml files, create a folder that is named PolicyDefinitions in the following location: \\\\FQDN\\SYSVOL\\FQDN\\policies. Note: FQDN is a fully qualified domain name. 


Q82. - (Topic 1) 

You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1.VM1 has a legacy network adapter. 

You need to assign a specific amount of available network bandwidth to VM1. 

What should you do first? 

A. Remove the legacy network adapter, and then run the Set-VMNetworkAdapter cmdlet. 

B. Add a second legacy network adapter, and then run the Set-VMNetworkAdopter cmdlet 

C. Add a second legacy network adapter, and then configure network adapter teaming. 

D. Remove the legacy network adapter, and then add a network adapter 

Answer:

Explanation: 

A. Set-VMNetworkAdaptercmdlet configures features of the virtual network adapter in a virtual machine or the management operating system 

B. The legacy network adapter doesn’t support bandwidth management 

C. The legacy network adapter doesn’t support bandwidth management 

D. Add a New network adapter The legacy network adapter doesn’t support bandwidth management 


Q83. - (Topic 3) 

You run a Windows 2012 R2 Hyper-V Role Server, you need to shrink the size of files.vhd. 

Which PowerShell cmdlet option you should run first? 

A. Dismount-VHD 

B. Mount-VHD 

C. Resize-VHD 

D. Convert-VHD 

Answer:


Q84. - (Topic 3) 

You have a virtual machine named VM1. 

You install Windows Server 2012 R2 on VM1. 

You plan to use VM1 as an image that will be distributed to sales users to demonstrate the features of a custom application. The custom application only requires the Web Server (IIS) server role to be installed. 

You need to ensure that the VHD file for VM1 only contains the required Windows Server 2012 R2 source files. 

Which tool should you use? 

A. servermanagercmd.exe 

B. dism.exe 

C. ocsetup.exe 

D. imagex.exe 

Answer:

Explanation: 

You can use DISM to: 

Add, remove, and enumerate packages and drivers. 

Enable or disable Windows features. 

Apply changes based on the offline servicing section of an unattend.xml answer file. 

Configure international settings. 

Upgrade a Windows image to a different edition. 

Prepare a Windows PE image. 

Take advantage of better logging. 

Service down-level operating systems like Windows Vista with SP1 and Windows Server 

2008. 

Service all platforms (32-bit, 64-bit, and Itanium). 

Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host. 

Make use of old Package Manager scripts. 

This command will mount the image before making any changes. This will ensure that only 

the required Windows Server 2012 R2 source files are contained. 


Q85. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. 

You have received instructions to convert a basic disk to a GPT disk. 

Which of the following is TRUE with regards to GPT disks? (Choose all that apply.) 

A. To convert a basic disk to a GPT disk, the disk must not contain any partitions or volumes. 

B. You can convert a basic disk to a GPT disk, regardless of partitions or volumes. 

C. GPT is required for disks larger than 2 TB. 

D. GPT is required for disks smaller than 2 TB. 

E. The GPT partition style can be used on removable media. 

F. GPT disks make use of the standard BIOS partition table. 

Answer: A,C 

Explanation: 

A. For a drive to be eligible for conversion to dynamic, all basic data partitions on the drive must be contiguous. 

C. GPT allows a much larger partition size greater than 2 terabytes (TB) D. 2 terabytes is the limit for MBR disks. 

E. Dynamic disks are not supported on portable computers, removable disks, detachable disks that use USB or IEEE 1394 interfaces. 

F. Windows only supports booting from a GPT disk on systems that contain Unified Extensible Firmware Interface (UEFI) boot firmware. Master boot record (MBR) disks use the standard BIOS partition table. GUID partition table (GPT) disks use unified extensible firmware interface (UEFI). One advantage of GPT disks is that you can have more than four partitions on each disk. GPT is also required for disks larger than 2 terabytes. Portable computers and removable media. Dynamic disks are not supported on portable computers, removable disks, detachable disks that use Universal Serial Bus (USB) or IEEE 1394 (also called FireWire) interfaces, or on disks connected to shared SCSI buses. If you are using a portable computer and right-click a disk in the graphical or list view in Disk Management, you will not see the option to convert the disk to dynamic. Dynamic disks are a separate form of volume management that allows volumes to have noncontiguous extents on one or more physical disks. Dynamic disks and volumes rely on the Logical Disk Manager (LDM) and Virtual Disk Service (VDS) and their associated features. These features enable you to perform tasks such as converting basic disks into dynamic disks, and creating fault-tolerant volumes. To encourage the use of dynamic disks, multi-partition volume support was removed from basic disks, and is now exclusively supported on dynamic disks. GPT disks can be converted to MBR disks only if all existing partitioning is first deleted, with associated loss of data. 

Q. What happens when a basic disk is converted to dynamic? 

A. For a drive to be eligible for conversion to dynamic, all basic data partitions on the drive must be contiguous. If other unrecognized partitions separate basic data partitions, the disk cannot be converted. This is one of the reasons that the MSR must be created before any basic data partitions. The first step in conversion is to separate a portion of the MSR to create the configuration database partition. All non-bootable basic partitions are then combined into a single data container partition. Boot partitions are retained as separate data container partitions. This is analogous to conversion of primary partitions. Windows XP and later versions of the Windows operating system differs from Windows 2000 in that basic and extended partitions are preferentially converted to a single 0x42 partition, rather than being retained as multiple distinct 0x42 partitions as on Windows 2000. 


Q86. - (Topic 3) 

You perform a Server Core Installation of window Server 2012 R2 on server named Server1. 

You need to add a graphical user interface (GUI) to server1. Which tool should you use? 

A. the Add-WindowsFeature cmdlet 

B. the Install-Module cmdlet 

C. the setup.exe command 

D. the Add-WindowsPackage cmdlet 

Answer:


Q87. - (Topic 3) 

You only want to share a printer with Group1, administrators, central owner and operators (pick 2 answers). 

A. Add permissions to Group1 

B. Remove permissions from administrators 

C. Add permissions to operators 

D. Add permissions to Central Owner 

E. Remove permissions from everyone. 

Answer:


Q88. - (Topic 1) 

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. 

The domain contains a user named User1 and a global security group named Group1. 

User1 logs on to a client computer named Computer1. 

You need to disable the computer account of Computer1. 

Which cmdlet should you run? 

A. Add-AdPrincipalGroupMember.hip 

B. Install-AddsDomainController 

C. Install WindowsFeature 

D. Install AddsDomain 

E. Roname-AdObject 

F. Set-AdAccountControl 

G. Set-AdGroup 

H. Set-User 

Answer:

Explanation: 

Set-ADAccountControl Enabled Specifies if an account is enabled. An enabled account requires a password. This parameter sets the Enabled property for an account object. This parameter also sets the ADS_UF_ACCOUNTDISABLE flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include: $false or 0 $true or 1 The following example shows how to set this parameter to enable the account. -Enabled $true 


Q89. - (Topic 3) 

You have a network printer connected to print server. You need to be able to print if print server goes down. 

What should you configure? 

A. branch office direct printing 

B. printer pooling 

C. spooling 

D. Print forwarding 

Answer:

Explanation: 

Branch Office Direct Printing can reduce Wide Area Network (WAN) usage by printing directly to a print device instead of a server print queue. This feature can be enabled or disabled on a per printer basis and is transparent to the user. It is enabled by an administrator using the Print Management Console or Windows PowerShell on the server. 

The printer information is cached in the branch office, so that if the print server is unavailable for some reason (for example if the WAN link to the data center is down), then it is still possible for the user to print. Branch Office Direct Printing requires the following operating systems: Windows Server 2012 Windows 8 


Q90. HOTSPOT - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. The network contains a DHCP server named DHCP1. 

You add a new network segment to the network. 

On the new network segment, you deploy a new server named Server1 that runs Windows 

Server 2012 R2. 

You need to configure Server1 as a DHCP Relay Agent. 

Which server role should you install on Server1? 

To answer, select the appropriate role in the answer area. 

Answer: