It is impossible to pass Microsoft 70-410 exam without any help in the short term. Come to Ucertify soon and find the most advanced, correct and guaranteed Microsoft 70-410 practice questions. You will get a surprising result by our Down to date Installing and Configuring Windows Server 2012 practice guides.

2016 Nov mcsa 70-410 practice test:

Q11. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1that runs Windows Server 2012 R2. 

You create a DHCP scope named Scope1. The scope has a start address of 192168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192. 

You need to ensure that Scope1 has a subnet mask of 255.255.255.0. What should you do first? 

A. From Windows PowerShell, run the Remove-DhcpServerv4PolicyIPRange cmdlet. 

B. From the DHCP console, modify the Scope Options of Scope1. 

C. From Windows PowerShell, run the Remove-DhcpServerv4Scope cmdlet. 

D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet. 

Answer:

Explanation: 

. Set-DhcpServerv4Scope Sets the properties of an existing IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server service. 

. Syntax: Parameter Set: WithoutRange Set-DhcpServerv4Scope [-ScopeId] <IPAddress> [-ActivatePolicies <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Delay <UInt16> ] [-Description <String> ] [-LeaseDuration <TimeSpan> ] [-MaxBootpClients <UInt32> ] [-Name <String> ] [-NapEnable <Boolean> ] [-NapProfile <String> ] [-PassThru] [-State <String> ] [-SuperscopeName <String> ] [-ThrottleLimit <Int32> ] [-Type <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] Parameter Set: WithRange Set-DhcpServerv4Scope [-ScopeId] <IPAddress> -EndRange <IPAddress> -StartRange <IPAddress> [-ActivatePolicies <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Delay <UInt16> ] [-Description <String> ] [-LeaseDuration <TimeSpan> ] [-MaxBootpClients <UInt32> ] [-Name <String> ] [-NapEnable <Boolean> ] [-NapProfile <String> ] [-PassThru] [-State <String> ] [-SuperscopeName <String> ] [-ThrottleLimit <Int32> ] [-Type <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] 


Q12. - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. The domain contains hundreds of groups, many of which are nested in other groups. 

The domain contains a user account named user1.User1 is a direct member of 15 groups. 

You need to identify of which Active Directory groups User1 is a member, including the nested groups. The solution must minimize administrative effort. 

Which tool should you use? 

A. Active Directory Users and Computers 

B. ADSI Edit 

C. Get-ADUser 

D. Dsget 

Answer:

Explanation: http://technet.microsoft.com/en-us/library/cc732535.aspx 


Q13. - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. The domain 

contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Both servers are member servers. 

On Server2, you install all of the software required to ensure that Server2 can be managed remotely from Server Manager. 

You need to ensure that you can manage Server2 from Server1 by using Server Manager. 

Which two tasks should you perform on Server2? (Each correct answer presents part of the solution.Choose two.) 

A. Run the systempropertiesremote. execommand. 

B. Run the Fnable-PsRemoting cmdlet. 

C. Run the Enable-PsSessionConfigurationcmdlet. 

D. Run the Confiqure-SMRemoting.ps1script. 

E. Run the Set-ExecutionPolicycmdlet. 

Answer: D,E 

Explanation: 

The output of this command indicates whether Server Manager Remoting is enabled or disabled on the server. To configure Server Manager remote management by using Windows PowerShell On the computer that you want to manage remotely, open a Windows PowerShell session with elevated user rights.To do this, click Start, click All Programs, click Accessories, click Windows PowerShell, right-click the Windows PowerShell shortcut, and then click Run as administrator. In the Windows PowerShell session, type the following, and then press Enter. Set-ExecutionPolicy -ExecutionPolicyRemoteSigned Type the following, and then press Enter to enable all required firewall rule exceptions. Configure-SMRemoting.ps1 -force –enable. 


Q14. - (Topic 2) 

Your network contains a Windows Server 2012 R2 image named Server12.wim.Server12.wim contains the images shown in the following table. 

You need to enable the Windows Server Migration Tools feature in the Windows Server 2012 R2 Datacenter image. 

You want to achieve this goal by using the minimum amount of administrative effort. 

Which command should you run first? 

A. dism.exe /image:c:\\Server12.wim /enable-feature /featurename:servermigration 

B. dism.exe /mount-wim /wimfile:c:\\Server12.wim /index:4 /mountdir:c:\\mount 

C. imagex.exe /capture c: c:\\Server12.wim "windows server 2012 r2 datacenter" 

D. imagex.exe /apply c:\\Server12.wim 4 c:\\ 

Answer:

Explanation: 

This command will mount the image before making any changes. 

References: 

http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx 


Q15. - (Topic 3) 

You only want to share a printer with Group1, administrators, central owner and operators (pick 2 answers). 

A. Add permissions to Group1 

B. Remove permissions from administrators 

C. Add permissions to operators 

D. Add permissions to Central Owner 

E. Remove permissions from everyone. 

Answer:


Updated powershell cheat sheet 70-410 pdf:

Q16. - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. 

A user named User1 attempts to log on to DC1, but receives the error message shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that User1 can log on to DC1. What should you do? 

A. Add User1 to the Remote Management Users group. 

B. Grant User1 the Allow log on locally user right. 

C. Modify the Logon Workstations setting of the User1 account. 

D. Modify the Account is sensitive and cannot be delegated setting of the User1 account. 

Answer:

Explanation: 

Domain controllers, by default, restrict the types of user accounts that have the ability to log on locally. 

References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 6: Create and Manage Group Policy, Objective 6.2: Configure Security Policies, p. 321 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 2: Configure server roles and features, Objective 2.3: Configure servers for remote management, p. 114 

http://technet.microsoft.com/en-us/library/ee957044(v=ws.10).aspx 


Q17. - (Topic 2) 

You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 Datacenter. 

You have a WIM file that contains the four images of Windows Server 2012 R2 as shown in the Images exhibit. (Click the Exhibit button.) 

You review the installed features on Server1 as shown in the Features exhibit. (Click the Exhibit button.) 

You need to install the Server Graphical Shell feature on Server1. 

Which two possible sources can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.) 

A. Index 1 

B. Index 2 

C. Index 3 

D. Index 4 

Answer: B,D 

Explanation: 

These images (since they are Full GUI, not CORE), contain the binaries necessary to install all GUI elements. When you install Windows Server 2012 R2, you can choose between Server Core Installation and Server with a GUI. The “Server with a GUI” option is the Windows Server 2012 R2 equivalent of the Full installation option available in Windows Server 2008 R2. The “Server Core Installation” option reduces the space required on disk, the potential attack surface, and especially the servicing requirements, so we recommend that you choose the Server Core installation unless you have a particular need for the additional user interface elements and graphical management tools that are included in the “Server with a GUI” option. For this reason, the Server Core installation is now the default. Because you can freely switch between these options at any time later, one approach might be to initially install the Server with a GUI option, use the graphical tools to configure the server, and then later switch to the Server Core Installation option. 

Reference: Windows Server Installation Options 


Q18. DRAG DROP - (Topic 3) 

Your company has a main office that contains 225 client computers. The client computers are located on a subnet that uses the network ID of 10.10.1.0/24. 

The company plans to open two branch offices. The offices will be configured as shown in the following table. 

You need to select a network prefix for each office to ensure that there are enough IPv4 addresses for each client computer. 

The solution must minimize the number of unused IP addresses. 

Which network prefixes should you select? 

To answer, drag the appropriate network prefix to the correct branch office in the answer area. 

Answer: 


Q19. - (Topic 3) 

You are attempting to delete a global security group in the Active Directory Users and Computers console, and the console will not let you complete the task. 

Which of the following could possibly be causes for the failure? (Choose all answers that are correct.) 

A. There are still members in the group. 

B. One of the group’s members has the group set as its primary group. 

C. You do not have the proper permissions for the container in which the group is located. 

D. You cannot delete global groups from the Active Directory Users and Computers console. 

Answer: B,C 

Explanation: 

A. Incorrect: It is possible to delete a group that has members. 

B. Correct: If any member sets the group as its primary group, then the system does not permit the group to be deleted. 

C. Correct: You must have the appropriate Active Directory permissions for the container in which the group is located to delete it. 

D. Incorrect: It is possible to delete groups using the Active Directory Users and Groups console. 


Q20. HOTSPOT - (Topic 3) 

You have a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup. 

You need to ensure that only members of the Administrators group and members of a group named Group1 can log on locally to Server1. 

Which settings should you modify from the Local Security Policy? To answer, select the appropriate settings in the answer area. 

Answer: