We provide real exam 70 680 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Microsoft 70 680 practice test Exam quickly & easily. The 70 680 pdf PDF type is available for reading and printing. You can print more and practice many times. With the help of our Microsoft 70 680 pdf dumps pdf and vce product and material, you can easily pass the exam 70 680 exam.

Q161. - (Topic 3) 

You have a computer named Computer1 that runs Windows 7. You have a server named Server1 that runs Windows Server 2008. 

Computer1 and Server1 have IPv4 and IPv6 installed. 

You need to identify whether you can connect to Server1 by using IPv6. 

What should you do? 

A. Run Ping Server1 -6. 

B. Run Ping Server1- n 6. 

C. Run Net view \\\\Server1. 

D. Open \\\\server1 from the Run dialog box. 

Answer:

Explanation: 

Ping The Ping tool is still widely used, although more firewalls block Internet Control Message Protocol (ICMP) echo requests than used to be the case. However, even if you cannot get past a firewall on your organization's network, Ping is still useful. You can check that the IPv4 protocol is working on a computer by entering ping 127.0.0.1. You can then ping the IPv4 address of the computer. You can find out what this is by using the Ipconfig tool. If your computer has more than one interface combined in a network bridge, you can ping the Ipv4 address of the network bridge. When you have established that you can ping your computer using an Ipv4 address, you can test that DNS is working internally on your network (assuming you are connected to a DNS server, a WAP, or have ICS configured on your network) by pinging your computer name—for example, entering ping canberra. Note that if DNS is not implemented on your system, ping canberra still works because the IPv6 link-local address resolves automatically. -6 Force using IPv6. 


Q162. HOTSPOT - (Topic 4) 

You have upgraded a Windows XP system to Windows 7. One of the applications is not showing menus when you launch it under Windows 7. How do you fix this issue? 

Answer: 


Q163. - (Topic 1) 

Your network consists of an Active Directory domain and a DirectAccess infrastructure. You install Windows 7 on a new portable computer and join the computer to the domain. You need to ensure that the computer can establish DirectAccess connections. 

What should you do? 

A. Install a computer certificate. 

B. Create a new network connection. 

C. Enable the Network Discovery firewall exception. 

D. Add the computer account to the Network Configuration Operators group. 

Answer:

Explanation: 

Certificates The DirectAccess IPsec session is established when the client running Windows 7 and the DirectAccess server authenticate with each other using computer certificates. DirectAccess supports only certificate-based authentication.DirectAccess Client Configuration Clients receive their DirectAccess configuration through Group Policy. This differs from traditional VPN configuration where connections are configured manually or distributed through the connection manager administration kit. Once you have added the computer's client account to the designated security group, you need to install a computer certificate on the client for the purpose of DirectAccess authentication. An organization needs to deploy Active Directory Certificate Services so that clients can automatically enroll with the appropriate certificates. 


Q164. - (Topic 3) 

You have a computer that runs Windows 7. 

You add a new hard disk drive to the computer and create a new NTFS partition. 

You need to ensure that you can use the Previous Versions feature on the new drive. 

What should you do? 

A. From Disk Management, convert the new disk to a dynamic disk. 

B. From System Properties, configure the System Protection settings. 

C. From System and Security, enable BitLocker Drive Encryption (BitLocker). 

D. From the properties of the new drive, create a share and modify the caching settings. 

Answer:

Explanation: 

System protection might not be turned on for the drive. If system protection is not turned on, Windows can't create previous versions.To turn on system protection: 

1. Click to open System.2. In the left pane, click System protection. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.3. Click the drive, and then click Configure.4. Click Restore system settings and previous versions of files, and then click OK. 


Q165. - (Topic 1) 

Your network has a main office and a branch office. The branch office has computers that run Windows 7. A network administrator enables BranchCache in the main office. You run Netsh on your computer as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that other computers in the branch office can access the cached content on your computer. 

What should you do? 

A. Turn on Internet Information Services (IIS). 

B. Configure the computer as a hosted cache client. 

C. Configure the BranchCache service to start automatically. 

D. Modify the Windows Firewall with Advanced Security rules. 

Answer:

Explanation: 

Distributed Cache Mode Distributed Cache mode uses peer caching to host the branch office cache among clients running Windows 7 on the branch office network. This means that each Distributed Cache mode client hosts part of the cache, but no single client hosts all the cache. When a client running Windows 7 retrieves content over the WAN, it places that content into its own cache. If another BranchCache client running Windows 7 attempts to access the same content, it is able to access that content directly from the first client rather than having to retrieve it over the WAN link. When it accesses the file from its peer, it also copies that file into its own cache. When you configure BranchCache in distributed cache mode, BranchCache client computers use the Hypertext Transfer Protocol (HTTP) for data transfer with other client computers. BranchCache client computers also use the Web Services Dynamic Discovery (WS-Discovery) protocol when they attempt to discover content on client cache servers. You can use this procedure to configure client firewall exceptions to allow incoming HTTP and WS-Discovery traffic on client computers that are configured for distributed cache mode. You must select Allow the connection for the BranchCache client to be able to send traffic on this port. 


Q166. - (Topic 2) 

A user reports that he is unable to start his computer. He provides the following information: 

. The boot partition is encrypted by using BitLocker Drive Encryption (BitLocker). 

. The user cannot locate his BitLocker recovery key. 

You need to start Windows 7 on the computer. The solution must use the minimum amount of administrative effort. 

What should you do? 

A. From the BIOS, disable the Trusted Platform Module (TPM). 

B. Start the computer from the Windows 7 installation media and select Repair your computer. 

C. Start the computer from the Windows 7 installation media, press SHIFT+F10, and then run CHKDSK. 

D. Start the computer from the Windows 7 installation media and select Install now. 

Answer:

Explanation: 

No recovery key = no recovery. Time to install. 

Any other option defeats the whole point of encrypting it. 

Encrypted volumes are locked when the encryption key is not available. When the operating system volume is locked, you can boot only to recovery mode. In recovery mode, you can enter the BitLocker password or you can attach the USB device that has the recovery key stored and restart the computer. Once you enter the recovery password or key, you can boot your computer normally. 

The following events trigger recovery mode: 

* The boot environment changes. This could include one of the boot files being modified. 

* TPM is disabled or cleared. 

* An attempt is made to boot without the TPM, PIN, or USB key being provided. 

* You attach a BitLocker-encrypted operating system volume to another computer. 


Q167. - (Topic 4) 

A virtual hard disk (VHD) contains a Windows 7 Enterprise installation. 

You need to mount the VHD on a client computer. 

What should you do? 

A. Run the Dism command with the /Mount-Wimoption. 

B. Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Yes. 

C. Run the Dism command with the /Add-Package option. 

D. Run the PEImg/Prepcommand. 

E. Add a boot image in WDS. 

F. Run the Dism command with the /Add-Driver option. 

G. Use Sysprep with an answer file and set the PersistAllDevicelnstalls option in the answer file to True. 

H. Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to No. 

I. Run the BCDEdit command. 

J. Use Sysprep with an answer file and set the PersistAllDevicelnstalls option in the answer file to False. 

K. Run the Start/w ocsetup command. 

L. Run the imageX command with the /Mount parameter. 

M. Create a capture image in WDS. 

N. Run the DiskPart command and the Attach command option. 

Answer:


Q168. - (Topic 3) 

You have a computer that runs Windows 7. 

A user installs a third-party media player on the computer. 

You discover that all media files automatically open by using the third-party media player. 

You need to ensure that all media files open automatically by using Windows Media Player. 

You must achieve this goal by using the minimum amount of administrative effort. 

What should you do? 

A. Select a media file. Right-click the file and select open with. 

B. Select a media file. Right-click the file and select Restore previous versions. 

C. From Control Panel, modify the Set your default programs settings. 

D. From Control Panel, modify the Set program access and computer defaults settings. 

Answer:


Q169. - (Topic 5) 

You use a portable computer that has Windows 7 Ultimate installed. The computer has a single 1-terabyte local drive C. 400 GB of the drive space is used by Windows and your documents libraries. 

You configure a backup task by using default settings to back up data to an empty 500-GB external USB drive. After two hours, the backup task stops, indicating that no free space is available on the USB drive. 

You need to be able to back up your libraries to the USB drive. 

You reformat a partition on the USB drive. 

What should you do next? 

A. Exclude the system image from the backup. 

B. Enable the NTFS file system compression on the USB drive, 

C. Enable the NTFS file system compression on drive C. 

D. Exclude folders located on remote computers from your libraries, 

Answer:


Q170. - (Topic 3) 

You have a computer that runs Windows 7. 

You need to prevent users from installing a specific removable drive on the computer. 

You connect the removable drive to the computer. 

What should you do before you create a Group Policy? 

A. From Device Manager, identify the device class GUID. 

B. From Device Manager, identify the device location information. 

C. From System Information, identify the device INF file. 

D. From System Information, identify the device driver file name. 

Answer:

Explanation: 

The device class GUID is used to identify the device. Prevent Windows 7 from installing or updating device drivers whose device setup class GUIDs you specify. This policy overrides any other policy that permits update or installation.