We provide real C9010-022 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass IBM C9010-022 Exam quickly & easily. The C9010-022 PDF type is available for reading and printing. You can print more and practice many times. With the help of our IBM C9010-022 dumps pdf and vce product and material, you can easily pass the C9010-022 exam.

Q121. - (Topic 2) 

Why would the 'bffcreate -d/dev/cd0 -t/tmp/images all' command be run? 

A. To create installation or update images of all software packages from media in /dev/cd0 

B. To install all software packages from the media in /dev/cd0 that have prerequisites met on the system or in /tmp/images. 

C. To make a file in /tmp/images that lists all of the software packages on media in /dev/cd0 

D. To make a copy of all software in /tmp/images and store onto the writable media in /dev/cd0 

Answer:


Q122. - (Topic 4) 

An AIX instance was initially configured to communicate over a single network interface. The administrator plans to configure an EtherChannel using the existing network interface and an additional network interface. 

Which is the correct sequence of steps to implement this configuration? 

A. Remove the existing IP information Add both interfaces as primary adapters Configure the IP address 

B. Configure the existing interface as a primary adapter Configure the additional interface as a backup adapter 

C. Configure the same IP address on the additional interface Add both adapters as primary adapters Remove the existing default route 

D. Add both adapters as primary adapters Configure the IP address as an alias on the additional interface 

Answer:


Q123. - (Topic 4) 

When could an IVM instance be preferable to an HMC for Power Systems management? 

A. Where multiple partition profiles are required 

B. When Systems Director is used for central management 

C. Where Power Compute Nodes are deployed in a PureFlex environment 

D. When a single entry level Power Systems server needs to be split into LPARs 

Answer:


Q124. - (Topic 4) 

The following verification routine is part of a script used to automate cloning rootvg. This routine determines which disks are available for use. Applying the logic, what configuration of disk would be selected by the script as a candidate? 

A. A SAN disk virtualized by NPIV. 

B. A local physical SAS drive, currently a member of the vg00 volume group. 

C. A physical SATA disk drive, currently containing the altinst_rootvg volume group. 

D. A SAN disk virtualized as a Virtual SCSI disk, currently not part of a volume group 

Answer:


Q125. - (Topic 1) 

In addition to an available DVD drive and 5GB disk space, what are the minimum server and LPAR requirements to install AIX 7.1 from DVD media? 

A. IBM PowerPC 970, POWER4, POWER5, POWER6 or POWER7 Server 512MB Memory 

B. IBM PowerPC 970, POWER4, POWER5, POWER6 or POWER7 Server 1024MB Memory 

C. IBM POWER4. POWER5. POWER6 or POWER7 Server 512MB Memory 

D. IBM POWER4, POWER5. POWER6 or POWER7 Server 1024MB Memory 3015 

Answer:


Q126. - (Topic 3) 

A new naming guideline requires the existing volume group, db2vg on hdisk1, be renamed 

to db2logsvg01. Which command sequence will accomplish this with the least downtime? 

A. varyoffvg db2vg exportvg db2vg importvg -y db2logsvg01 hdisk1 

B. odmupdate -q VGNAME db2vg db2logsvg01 sync db2vg db2logsvg01 varyonvg db2logsvg01 hdisk1 

C. varyoffvg db2vg chvg -a name db2vg db2logsvg01 varyonvg db2vg hdisk1 

D. savevg db2vg rmvg db2vg mkvg -y db2logsvg0l hdisk1 restvg hdisk1 

Answer:


Q127. - (Topic 4) 

What is the best practice when adding a new paging space? 

A. Make the new paging space larger than the current paging space size 

B. Add the new paging space to a different disk drive from where the primary paging space resides 

C. Add the new paging space to the same disk drive where the primary paging space resides 

D. Make the new paging space smaller than the current paging space size 

Answer:


Q128. - (Topic 2) 

An administrator needs to determine if system microcode is at the most currentlevel. Which tool will identify current microcode levels, and provide an output file which can be used by the IBM Microcode Discovery Service (MDS) for comparison? 

A. FLRT 

B. invscout 

C. Ismcode 

D. prtconf 

E. urncode_latest 

Answer:


Q129. - (Topic 2) 

How can an administrator determine if DLPAR operations can be performed for a specific LPAR? 

A. Run the Isdlpar -partition command on the local HMC. 

B. Run the IsrsrclBM.MCP command on the LPAR. 

C. Run the Iparstat -dlpar command on the LPAR. 

D. Run the rmcctrl -d command on the local HMC. 

Answer:


Q130. - (Topic 2) 

In order to enable an AIX host to use one virtual Ethernet adapter to communicate on multiple VLANs, what is required? 

A. The VLAN devices used by the host must be configured with IP addresses on different subnets. 

B. The virtual Ethernet adapter must be set to full duplex in AIX. 

C. VLAN devices must be configured in the AIX host. 

D. The virtual Ethernet adapter must be configured as a trunk adapter. 

Answer: